1.5″ End Cap (Pressure PVC-U)

Finishing a pressure line properly matters. This 1.5″ End Cap (Pressure PVC‑U) seals the end of a 1.5″ pressure pipe to create a secure, watertight stop in your pond system.

Designed for use on pressure-rated PVC‑U pipework, it’s ideal for blanking off unused outlets, future-proofing pipe runs or safely terminating a line.

Why It’s The Right Fit

• Designed for 1.5″ pressure PVC‑U pipe
• Creates a permanent watertight seal
• Suitable for pond filtration pressure lines
• Strong, rigid PVC‑U construction
• Clean, professional finish to pipework

Installation Notes

• Ensure the pipe end is clean and square-cut.
• Use the correct PVC solvent cement for pressure systems.
• Apply solvent evenly and push fully home with a slight twist.
• Allow proper curing time before pressurising the line.

Pro tip: Dry-fit your pipework first to confirm alignment before using solvent weld. Once bonded, the joint is permanent.

Where It’s Used

• Blanking unused filter ports
• Sealing manifold ends
• Closing off future expansion lines
• Temporary test points during installation

Safety First

• Use solvent cement in a well-ventilated area.
• Follow curing times before running pumps.
• Always depressurise the system before modifying pipework.

A simple fitting, but essential for tidy, reliable plumbing.