20″ x 2.5″ 5 Micron Moulded Particle/Sediment Filter Cartridge

If you need finer sediment control before carbon or membrane stages, the 20″ x 2.5″ 5 Micron Moulded Particle / Sediment Filter Cartridge provides tighter particle filtration for improved system protection.

With a 5 micron rating, it captures finer suspended solids such as silt, rust and debris, helping protect downstream filters and maintain consistent water quality.

What it does

• • 5 micron sediment filtration
  • Removes fine suspended particles
  • Protects carbon cartridges and RO membranes

• Fits standard 20″ x 2.5″ filter housings

By reducing fine particulate load, it helps extend the life of secondary filtration stages and maintain steady flow.

Typical Applications

• Reverse osmosis pre-filtration
• Pond fill and top-up water treatment
• Water polishing systems
• General sediment reduction

Installation & Maintenance

• Install in a compatible 20″ x 2.5″ housing
• Isolate the water supply before replacement
• Replace when flow rate drops or cartridge shows visible contamination
• Monitor system pressure where applicable

Regular cartridge replacement helps protect sensitive filtration equipment and keeps water treatment systems operating efficiently.

Technical Data:

Operating Temperature °C (°F) 2 – 80 (35 – 175)
Flow Rate gpd (lph) < 10,200 (< 1,800)
Rated Capacity G (l) 4,760 (18,000)
Average Life Span 3 – 6 Months
Average Efficiency 90%
Inner Diameter ” 1.1