1″ Tee (Pressure)

Split a 1″ pressure line cleanly and securely. The 1″ Tee (Pressure PVC-U) is a solvent weld equal tee designed for rigid, pump-fed pond pipework.

It allows you to branch off an existing 1″ pressure line while maintaining strength and reliability.

Why it’s a solid choice

• Made for 1″ pressure PVC-U pipe
• Three solvent weld sockets for a permanent, watertight seal
• Suitable for pump-fed systems under pressure
• Matches other 1″ pressure fittings in the range

Where it fits in your system

Typical uses include:

• Creating a branch to a UV-C unit
• Feeding a secondary return line
• Adding a bypass or isolation loop

Use pressure fittings on pumped lines. Waste fittings are not built to handle operating pressure and can fail under load.

Installation notes

• Clean all pipe ends and sockets with PVC pipe cleaner
• Apply suitable solvent cement for pressure PVC-U
• Insert fully with a slight twist and hold briefly
• Allow curing time before restarting your pump

Work in a well-ventilated area and follow adhesive safety guidance.

A simple fitting, but essential when building flexible, expandable pond pipework. Fit it properly and your 1″ pressure system stays strong and leak-free.